Main range of productModicon Quantum automation platform product or component typePower supply module power supply typeRedundant Complementary input voltage48...60 V DC 48...60 V input current<= 3800 mA inrush current14 A 40 V input power interruption13 ms 48 V associated fuse rating2 A time-lag output voltage5.1 V DC power supply output current8 A redundant output overvoltage protectionInternal output overload protectionInternal power dissipation17.2 W alarm output1 NC 6 A 220 V power supply fault local signalling1 LED green power (PWR OK) markingCE module formatStandard product weight0.65 kg Environment standardsCSA C22.2 No 142UL 508 product certificationsCUL resistance to electrostatic discharge4 kV contact conforming to IEC 801-28 kV on air conforming to IEC 801-2 resistance to electromagnetic fields10 V/m 80...2000 MHz conforming to IEC 801-3 ambient air temperature for operation0...60 °C ambient air temperature for storage-40...85 °C relative humidity95 % without condensation operating altitude<= 5000 m Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents & DownloadsLanguage
CADSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema48 Vdc/8 A Redundant Power Supply ModuleWiring Diagram
NOTE: A normally closed relay contact rated at 220 Vac, 6A / 30 Vdc, 5A is available on terminals 1 and 2 of the power terminal strip. This contact set may be used to signal input power OFF, or a power supply failure.Operating Curve and Hold-up Capacitor Timing Chart
NOTE: Tolerance to input interruptions may be increased by adding a ≥ 80 Vdc electrolytic capacitor between 5 and 6 of the power terminal strip. Refer to the hold-up capacitor timing chart (above) for capacitor values.