FAQs

Ask a Question

What is the default IP address of ScadaPack controller ?

Default IP of SCADAPack controller is 0.0.0.0, means there is no default configured IP till version 8.12.16. The user must create and download IP settings by configuring them using E-configurator tool through USB or Serial Cable. Following are normally the default serial port settings.

Port Mode: RS232
Port Baud Rate: 9600
Port Data Mode: 8-bit No Parity

Refer to hardware manual of the relevant controller for more details and port settings.


 
Was this helpful?
What can we do to improve the information ?