FAQs

Ask a Question

what is the recommended torque settings for Iconic terminals screws switches and sockets?

Clamping torques for screws, Iconic switches and sockets,
The torque settings listed below are a guide based on the max torque required as set out in  AS/NZS 3100 table 8.7 

Sockets
All single sockets with (M5 screw) terminals screws clamping torque 132 cNm  or 1.3Nm 
Twin horizontal sockets without extra switch with (M5 screw) terminals screws clamping torque 132 cNm  or 1.3Nm 
Twin horizontal sockets with extra switch (M4 screw) terminals screws clamping torque 80 cNm  or 0.8Nm 
Twin vertical sockets with (M4 screw) terminals screws clamping torque 80 cNm  or 0.8Nm 
All quad sockets with (M5 screw)  terminals screws clamping torque 132 cNm  or 1.3Nm 

Switch 
10amp and 20amp switch with 3.5mm screw terminal clamping torque 50 cNm or .5Nm
32amp switch with M4 screw terminals clamping torque 80 cNm  or 0.8Nm 

 
 
Was this helpful?
What can we do to improve the information ?