FAQs

Ask a Question

Video: How to program an ATV320 for 3 wire control?

Issue:
Programming an Altivar ATV320 for 3 wire control

Product Line:
Altivar 320, ATV320

Environment:
All

Cause:
Programming, setup

Resolution:



From main menu,
Enter on dial to go to CONF and enter.
Go down to FULL and enter.
Go down to I_0- and enter.
Set TCC for 3C for 3 wire control.  This will require the enter key(dial) to be pressed for 3 seconds.
In 3 wire control mode, DI1 is normally closed momentary stop and DI2 is normally open momentary start.
If DI1 is not made the drive will display NST.
Was this helpful?
What can we do to improve the information ?