What is the C-Bus Spectrum Touch Screen Nail Bracket part number?
No, the Spectrum comes with an Installation Template, it is used for stud/plasterboard wall installation.
To install a wall-mounted unit in a stud/plasterboard wall:
1. Cut an appropriately sized hole using the provided template. Ensure you leave sufficient clearance from studs and other obstructions.
2. Remove the green screw-terminal connector and wire to C-Bus.
3. Plug the connectors into the unit (C-Bus and RS-232 if used) and place the touchscreen in the wall.
4. Tighten the four mounting screws to rotate and tighten the mounting flaps.
Mounting in Stud Walls Caution To avoid damage to the mounting hardware and to the plasterboard, do not over tighten the mounting screws.