Technical FAQs

Ask a Question

SILC - Wireless Gate way not showing indicator lights after initial install and power up.

This is typically only seen on a new installation.

After powering up for the first time if you are not seeing any green/red flashing indicator on the gateway this indicates it's in a dormant state.

Also pressing the AP or Reset button will not always put the gateway into AP mode or initialize the gateway.

To resolve this, press and hold any 'Bell Press' button on the network for 25 seconds until the LED Light fittings start to flash, the gateway will now be rapidly flashing the 'green' LED.
Do not press and hold the Master Off as this will not put the gateway into AP mode.

Now follow the prompts in the SILC App on your device to start the authentication process.
Was this helpful?
What can we do to improve the information ?