Technical FAQs

Ask a Question

What is an alternative for PM1200?

The PM1200 has been replaced with METSEPM1200A and METSEPM1200.
Some of the key features are:
Description Characteristics
Range of product PowerLogic PM1000
Device short name PM1200
Product or component type Power meter
Type of measurement Power factor
Active and reactive energy
Active and reactive power
Frequency
Voltage
Current
Supply voltage 44...277 V DC
44...277 V AC (50/60 Hz)
Network frequency 50/60 Hz
Power consumption in VA < 3 VA at 240 V AC
Display type LED, digital
Display resolution 3 lines with 4 digits
Sampling rate 20 samples/cycle
Measurement current 50 mA...6 A
Input type Current 0...1 A (impedance <= 0.1 Ohm)
Current 0...5 A (impedance <= 0.1 Ohm)
Measurement accuracy ± 1 % apparent power
± 1 % power factor
± 0.1 % frequency
± 1 % energy
± 1 % voltage
± 1 % current
± 1 % power
Accuracy class Class 1 (active energy according to IEC 62053-21)
Class 2 (reactive energy according to IEC 62053-23)
Communication port protocol Modbus
Communication port support RS485
Transmission rate 19.2 kbauds


For further information please visit http://www.schneider-electric.com.au/en/PM1200
 





 
 

 
Was this helpful?
What can we do to improve the information ?