Technical FAQs

Ask a Question

BACnet - BACnet is not communicating?

- First check to see if the 'figure 8' LED is chasing in a clockwise direction, if showing something different refer to Error Guide above the LED on the chasis, if this is showing a '0' the unit has lost a firmware issue and you will need to contact Technical Support?
- If chasing ok, check to make sure DIP Switch 1 is down, 2 is up if configured for 'IP', 3 is down, 4 is up if configured for MSTP all others should be down.
Was this helpful?
What can we do to improve the information ?