Yes, the part number is 30USBCM.
The USB Charger Mech is designed to fit into 30 Series aperture wall plates and sockets, in both bracket and wall box environments. With up to 1.2A of charge current available, its smart-charging technologies ensure devices such as phones, tablets, cameras and eBook readers can be charged at the maximum safe rate governed by the device.
Some of its key features are:
30 Series USB Charger Mech suits most Clipsal Switch Plate styles and colours, including Clipsal 2000 Series™, C2000™, Saturn™ Data, Slimline® and Standard.
Fit up to three USB Charger Mechs per plate.
Available as a single mech or in a variety of pre-assembled Clipsal Wall Plate combinations.
Match coloured plates with compatible colour caps, to suit decor or identify type of power in a commercial environment.
Able to be retrofitted, quickly, into Clipsal Wall Plates with 30 Mech apertures.
Able to reduce overall system load and infrastructure by replacing standard GPOs with 30 Series USBs.
Meets five-star energy ratings for efficiency with extremely low standby power (< 0.07W).
Cable compensation allows devices to be charged quickly (compliant with USB Charging Specification BC1.2).
Inbuilt protection for surge, over-temperature and over-current occurences.